Machining is any process in which a cutting tool is used to remove small chips of material from the workpiece (the workpiece is often called the "work"). To perform the operation, relative motion is required between the tool and the work. This relative motion is achieved in most machining operation by means of a primary motion, called "cutting speed" and a secondary motion called "feed". The shape of the tool and its penetration into the work surface, combined with these motions, produce the desired shape of the resulting work surface.
OKK 4C-Surface Mill 420mm x 1,100mm
Duplex Side Mill 1,200mm x 1,200mmmotion
Surface & Side Mill 1,500mm x 5,000mm
Surface Grind 1,150mm x 4,500mm
Working capacity :
Working capacity :
Working capacity :
Working capacity :
Working capacity :
Working capacity :
Working capacity :
Working capacity :
Working capacity :
Working capacity :
Working capacity :
ADDRESS
Cheras Jaya Main Office
Lot 2, Jalan CJ 1/6C,
Kawasan Perusahaan Cheras Jaya,
43200 Selangor,
Malaysia.
CONTACTS
Email: info@phh.com.my
: sales@phh.com.my
Telephone: +60 3 9075 6800 / 1700 81 6866
Fax: +60 3 9075 6866 / 1700 81 0386
LINKS
FOLLOW US