easy site builder software

PRE MACHINING

A roughing operation is used to remove large amounts of material rapidly and to produce a part geometry close to the desired shape. A finishing operation follows roughing and is used to achieve the final geometry and surface finish

Overview of machining technology

Machining is any process in which a cutting tool is used to remove small chips of material from the workpiece (the workpiece is often called the "work"). To perform the operation, relative motion is required between the tool and the work. This relative motion is achieved in most machining operation by means of a primary motion, called "cutting speed" and a secondary motion called "feed". The shape of the tool and its penetration into the work surface, combined with these motions, produce the desired shape of the resulting work surface.

Pre-Machining Capacity & Facilities

OKK 4C-Surface Mill 420mm x 1,100mm

Duplex Side Mill 1,200mm x 1,200mmmotion

Surface & Side Mill 1,500mm x 5,000mm

Surface Grind 1,150mm x 4,500mm


PRE-MACHINING PROCESSES

EVERISING AUTOMATED BAND SAW

Working capacity :
  • (Thickness) X (Width) X (Length)
  • 1000mm X 570mm X        -
  • Tolerance : ±1-2mm
  • Unit : 2

  MEGA AUTOMATED BAND SAW

Working capacity :

  • (Thickess)X(Width)X(Lengh)
  •          -      X 300mm X 650mm
  • Tolerance : ±1.2mm
  • Unit : 1

AMADA BAND SAW

Working capacity :

  • (Thickness) X (Width) X (Length)
  •          -         X 400mm X 2500mm  
  • Tolerance : ±1-2mm
  • Unit : 5

WEIREN BAND SAW

Working capacity :

  • (Thickness) X (Width) X (Length)
  •         -         X 350mm x 700mm
  • Tolerance : ±1-2mm
  • Unit : 1

WALDRICH COBURG
(SURFACE GRINDING)

Working capacity :

  • (Thickness) X (Width) X (Length)
  • 1000mm X 1100mm x 4500mm
  • Tolerance : ±0.02mm
  • Unit : 1

FREEPORT
(SURFACE GRINDING)

Working capacity :
  • (Thickness) X (Width) X (Length)
  • 450mm X 1200mm x 2000mm
  • Tolerance : ±0.02mm
  • Unit : 1

HITACHI SEIKI
(SURFACE / SIDE MILLING)

Working capacity :

  • (Thickness) X (Width) X (Length)
  • 1000mm X 1500mm x 5000mm
  • Tolerance : ±0.1-0.2mm
  • Unit : 1

OKAMOTO
(SURFACE GRINDING)

Working capacity :

  • (Thickness) X (Width) X (Length)
  • 500mm X 600mm x 1200mm
  • Tolerance : ±0.02mm
  • Unit : 4

LUMSDEN 36
(ROUGH GRINDING)

Working capacity :

  • (Thickness) X (Width) X (Length)
  • 250mm X        -         x ø1010
  • Tolerance : ±0.1mm
  • Unit : 2

NIIGATA AUTO SURFACE MILLING
(SURFACE MILLING)

Working capacity :

  • (Thickness) X (Width) X (Length)
  • 300mm X 300mm x 600mm
  • Tolerance : ±0.1mm
  • Unit : 1

OKK
(SURFACE MILLING)

Working capacity :

  • (Thickness) X (Width) X (Length)
  • 500mm X 420mm x 1100mm
  • Tolerance : ±0.1-0.2mm
  • Unit : 4

LAGUN VERTICAL KNEE MILLING

Working capacity :

  • (Thickness) X (Width) X (Length)
  • 400mm X 250mm x 1100mm
  • Tolerance : ±0.1-0.2mm
  • Unit : 2

WILLING DUPLEX NC MILLING

Working capacity :

  • (Thickness) X (Width) X (Length)
  • 250mm X 1200mm x 1200mm
  • Tolerance : ±0.05mm
  • Unit : 1

CHUO-SEIKI DOUBLE HEAD MILLING

Working capacity :

  • (Thickness) X (Width) X (Length)
  • 150mm X 800mm x 800mm
  • Tolerance : ±0.02mm
  • Unit : 5

TOYODA
(SIDE MILLING)

Working capacity :

  • (Thickness) X (Width) X (Length)
  • 500mm X 400mm x 450mm
  • Tolerance : ±0.1-0.2mm
  • Unit : 1

GEN E
(SIDE MILLING)

Working capacity :

  • (Thickness) X (Width) X (Length)
  • 200mm X 350mm x 1000mm
  • Tolerance : ±0.1-0.2mm
  • Unit : 1

FOLLOW US

ADDRESS
Cheras Jaya Main Office
Lot 2, Jalan CJ 1/6C,
Kawasan Perusahaan Cheras Jaya,
43200 Selangor,
Malaysia.

CONTACTS
Email: info@phh.com.my
            : sales@phh.com.my

Telephone: +60 3 9075 6800 / 1700 81 6866
Fax: +60 3 9075 6866 / 1700 81 0386

Thanks for filling out form!