| JIS | AISI | WNr | DIN |
| S50C/53 | 1050 | 1.1213 | 1.1730 |
CHEMICAL COMPOSITION(Typical Analysis %)
| C | Si | Mn |
| 0.50 | 0.30 | 0.70 |
STEEL PROPERTIES
1050 is an easily machinable carbon steel characterize by good machinability or good mechanical strength
PHYSICAL PROPERTIES
Thermal coductivity W/(m.K) 200°C/40 400°C/41 600°C/27
Density g/cm3 20°C/7.87 200°C/7.82 400°C/7.75
Coefficient of linear thermal expansion
| 10-1 °C-1 | 20-100°C | 20-200°C | 20-300°C | 20-400°C |
|---|---|---|---|---|
| - | 12.0 | - | 13.5 |
APPLICATIONS
Punch holders, Die holders, Guide plates, Backing plates, Jigs, Fixtures, Simple bending dies, and simple structural components
HEAT TREATMENT
| SOFT ANNEALING(°C) | COOLING | HARDNESS (HB) |
| 700 | FURNACE | MAX. 200 |
| HARDENING FROM(°C) | IN | HARDNESS AFTER QUENCHING (HRC) |
| 820-870 | WATER | 57±3 HRC |
| TEMPERING (°C) | 200 | 250 | 300 | 400 | 500 | 600 |
| HARDNESS (HRC) WATER | 58 | 56 | 53 | 45 | 37 | 27 |
| HARDNESS (HRC) OIL | 31 | 30 | 29 | 27 | 25 | 20 |
ADDRESS
PHH METAL 1 SDN. BHD.
Wisma PHH, Jalan PPU 3,
Taman Perindustrian Puchong Utama,
47100 Selangor,
Malaysia..
CONTACTS
Email: info@phh.com.my
: sales@phh.com.my
Telephone: +60 3 8068 7000
Fax: +60 3 8068 2020
LINKS
FOLLOW US